 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||||||||
 |
 |
 |
|
||||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
||
 |
|
||||||||||||||||
 |
 |
 |
 |
 |
|
||||||||||||
 |
 |
|
|||||||||||||||
 |
Megger MEG 10-01 NEW | ||
|
10kV Insulation Tester The MEG 10-01 offers the ability to test insulation to 10kV, to comply with IEEE43: 2000. Micro processor control allows automatic insulation resistance and polarisation index tests, and results storage and download give full diagnostic information. |
|||
 |
TTR550503 NEW Three-Phase Transformer Turns Radio Test Set Measures three phases simultaneously, the turns ratio of power, instrument and distribution transformers. With a turns ratio range up to 10,000:1 and a 0.1% accuracy and only weighing 7.5kg, the TTR is ideal for testing complex three-phase substation power transformers quickly and accurately, minimizing the possibility of errors. The performance of the TTR has been further enhanced by improved software allowing improved reporting and remote control from a PC or laptop. |
||
 |
Megger OTS60PB | ||
|
Portable Automatic Testing The smallest lightest fully automatic portable oil test set available with test voltage up to 60kV. Internal rechargeable battery for operation in remote locations. Optional printer and fully programmed international test sequences. |
|||
 |
Megger DET2/2 | ||
|
High Resolution Earth Tester High resolution to 1mohm. This level is required to measure resistivity to adequate depth on many substation and communication sites. Measurement of the low earth values required on many installations, to meet Grip Potential Rise (GRP) requirements also, requires this resolution to ensure valid results. Hardware and software noise filtering to retain resolution under real test conditions. |
|||
 |
Megger BM25 | ||
|
Analogue/digital auto
testing Automated diagnostic testing in a tough field case. A cost-effective combination of portability and productivity offering enhanced test data with selectable test voltage and test time. |
|||
 |
UNINTERRUPTIBLE POWER
SYSTEM Single Phase - 250VA to 25KVA |
||
| Three Phase - 15KVA to 150KVA | |||
|
Designed to supply continuous power to critical
loads power during outages. Solves 100% of all power problems commonly
encountered. It protects against power sags, surges, transients,
brownouts and blackouts. Backup times available from 10 minutes to several hours. Units are built to be field expandable. |
|||
 |
RESILIENT SEAT GATE VALVES | ||
|
Features - WRC Listed. - Low Operating Torgue. - Bubble tight shut off. - Unobstructed waterway-larger than nominal on all sizes. - Fully encapsulated gate. - Double stem seals and dirt seal. - O-Ring below stem collar to facilitate reparking under pressure. - Fusion Bonded Epoxy Coating inside and out. - Square bottom to facilitate storage. - Full size range 50mm - 300mm. - All seals by "O" Ring. Test Pressure - Body: 1.5 x PN - Seat: 1.1 x PN - Working Pressure: 16bar Service Temperature - Max. 600C. Application - Water, Sewage. |
|||
 |
|||
| CF70 Series CABLE FAULT LOCATOR | |||
|
Features - Proof tester, burner, thumper in one self- contained unit. - Burn currents to 100 mA. - Impulse energies of 3750J to 7500J. - Automatic and manual thumper mode. - Operable from line voltage or generator. - Single HV output for all modes. - Isolated and shielded return current path. - Zero start interlock. - External interlock. - Face panel window. - Mode indicator lights. - Electrically operated shorting solenoids with mechanical ground assurance. - Internal radar pickup for voltage decay method Benefits - Positive faults identification and location. - Isolated return for increased operator safety. - One unit for all URD cable maintenance testing. - Visual ground verification. - Precise impulse repetition. - Variable impulse rate from 3 to 30 seconds. |
|||
 |
800PL Series DC HIPOT TESTERS | ||
|
Features - Rugged and portable. - One-piece construction. - Shielded output cable. - Guard circuit. - Full-wave voltage doubling rectifier circuit. - Zero start interlock. - Internal discharge on HV OFF. - Meter accuracy + 2% full scale. - 5 mA current rating for cable charging. - External interlock provisions. - Three range current meter. - Four range current meter. - No internal leakage at full load. - Instantaneous overload relay. - Surge-limiting resistors in HV output. Benefits - Ideal for field testing - lightweight, compact, and rugged. - Safe and easy operation. - No exposed high voltage. - Accurate leakage current measurement. - Guard circuit eliminates stray leakage currents. |
|||
 |
CABLE DYNAMICS TDR 1130 | ||
|
Features - Digital TDR. - LCD Display. - Internal Trace Storage. - 16 Sample Memory. - Serial Port with Software for Waveform Download. - Battery Operated. Benefits - Pre-Locate Faults. - Use the 1130 to Diagnose Cable Fault. - Easy to Use. - Compatible with Common "Thumpers". - Reduce Outage Time. - Reduce Cable Damage. - Simplified Operator Training. |
|||
about us || services || products || management || customers || contact || home
© Copyright 2003. All Rights Reserved. Any duplication, transfer or manipulation of the content of this website is prohibited.